Hello World Blink

by Rezz on October 2, 2011

This is a basic example how arduino works. In this arduino projects you’ll see how arduino control LED on for 1 second and off for 1 second repeatedly.

Parts List;
1) 1x 5mm red LED
2) 1x Arduino

1) Connect cathode lead of LED (shorter lead) to ground pin and anode lead of LED (longer lead) to pin 13.


Upload this code to your arduino

Turns on an LED on for one second, then off for one second, repeatedly.This example 
code is in the public domain.

Code hosted at: arduinoprojects101.com
void setup() {
// initialize the digital pin as an output.
// Pin 13 has an LED connected on most Arduino boards:
pinMode(13, OUTPUT);
void loop() {
digitalWrite(13, HIGH);   // set the LED on
delay(1000);              // wait for a second
digitalWrite(13, LOW);    // set the LED off
delay(1000);              // wait for a second

There is 2 section of code arduino running, first setup() function which run once and second loop() function running continuously.

In setup function pinMode 13 declare as OUTPUT.

In loop function the code set ON (supply 5v) to pin 13 to turn LED on with digitalWrite(13, HIGH).

Set delay time to 1 second, which 1 second = 1000 milisecond. delay (1000).

Turn off LED after 1 second with digitalWrite(13, LOW).

The code continuously running within the loop.

Leave a Comment

Previous post:

Next post: